Garage door springs can consist of either tension springs or extension springs which are located at the edge of the garage door. These springs are essential in facilitating opening and closing of the garage door and the functionality of the garage door opener. In some instances, the tension springs may incur much pressure which may make them to break. Besides, lack of insufficient lubrication may also make such springs to experience wear and tear which may ultimately lead to their breakage. This may call for the need to seek professional garage door repair services which may then undertake garage door spring repair process.

When it comes to the process of undertaking the garage door repair for the springs, you will actually need to understand the following steps:

1.  Getting the Correct Measurement of the Springs

One of the crucial factors that you need to take into account is taking the right measurements of the current springs. This will ensure that you have identified the perfect match. Springs available can either be 1-spring system or the 2-spring system which vary according to their long lasting effect. Apparently, you will discover that the 2-spring system is more efficient because it provide great balancing effect for the garage door when you are undertaking garage door installation. Once you have obtained the measurements of one spring, you can easily establish the measurements of the 2-spring system.

2.  Getting the Springs

There are different garage door offers that you can come across for the springs which are available in the market. We are ready to offer you the best and durable springs at a cost that you can comfortably manage. Getting a high quality springs for spring repair garage door will enable you to get the value for your money.

3.  Fixing the Garage Door Spring

One thing that you need to understand is that the torsion springs are a bit risky to fix them due to the pressure and force that is imposed on them. There is great need to ensure that you have incorporated the necessary tools required to undertakes the procedure; this is meant to protect your hands, limbs and even your body.If you cannot handle it by yourself, it would be critical to seek the assistance of the garage door expert who can efficiently assist in performing the garage door repair.

4.  Making a Shaft for the Torsion

Once you have gathered the necessary tools, you can make a torsion shaft with the drum still holding onto the cable. Ensure that the cable and the drum are intact such that they may not loose grip and injure you.

5.  Unwinding of the Old Spring

Using the set screw, you can cautiously start to unwind the old spring after properly placing the fitting bar. Ensure that the old spring is not broken during the process as the pressure emanating from it can cause hazardous effect.

6.  Making the Torsion Hardware Loose

This include loosening the bolts found within the torsion spring and removing them. You can actually remove them through sliding them towards the drum.

7.  Making a Replacement with New Springs

First the drum is slid far from the bearing. Once the old spring has been eliminated, a new spring can be slide and then followed by a winding cone that stretches towards the end of the shaft.This will have completed the garage door installation process of new springs.